|
|
Tensile Tests ( Part – X)
(Preview)
Tensile Tests ( Part – X)
Crack propagation - compounding stress intensity factors, growth in steels including short cracks, NDT.
The compounding method of estimating stress intensity factors for cracks in complex configurations using solutions from simple configuratio...
|
sabita
|
0
|
417
|
|
|
|
|
|
Tensile Tests ( Part – IX)
(Preview)
Tensile Tests ( Part – IX)
Fatigue crack propagation rates and threshold stress intensity factors in high alloy and corrosion resistant (stainless) steel.
ESDU 84003 provides constant amplitude crack growth rate data for a wide range of common specifications of high allo...
|
sabita
|
0
|
462
|
|
|
|
|
|
Tensile Tests ( Part – VIII)
(Preview)
Tensile Tests ( Part – VIII)
Fatigue crack propagation rates and threshold stress intensity factors in high alloy and corrosion resistant (stainless) steel.
ESDU 84003 provides constant amplitude crack growth rate data for a wide range of common specifications of high al...
|
sabita
|
0
|
375
|
|
|
|
|
|
Tensile Tests ( Part – VII)
(Preview)
Tensile Tests ( Part – VII)
Crack propagation - steels, including short cracks and threshold values.
Fatigue crack propagation in low and medium strength low alloy steel plate, bar and forgings.
Constant amplitude fatigue crack propagation rate (da/dN) data are provided...
|
sabita
|
0
|
413
|
|
|
|
|
|
Tensile Tests ( Part – VI)
(Preview)
Tensile Tests ( Part – VI)
Factors influencing yield stress
The stress at which yield occurs is dependent on both the rate of deformation (strain rate) and, more significantly, the temperature at which the deformation occurs. Early work by Alder and Philips in 1954 found tha...
|
sabita
|
0
|
407
|
|
|
|
|
|
Tensile Tests ( Part – V)
(Preview)
Tensile Tests ( Part – V)
Yield Criterion
A yield criterion is an hypothesis concerning the limit of elasticity under any combination of stresses. There are two interpretations of yield criterion: one is purely mathematical in taking a statistical approach while other models attem...
|
sabita
|
0
|
423
|
|
|
|
|
|
Tensile Tests ( Part – IV)
(Preview)
      &nbs...
|
sabita
|
0
|
412
|
|
|
|
|
|
Tensile Tests ( Part – III)
(Preview)
Tensile Tests ( Part – III)
A DUCTILE material, like structural steel, is one which exhibits a clearly defined yield point followed by a large plastic strain, which allows the material to be bent or drawn without breaking and such material can absorb large amounts of strain ener...
|
sabita
|
0
|
417
|
|
|
|
|
|
Tensile Tests ( Part – II)
(Preview)
Tensile Tests ( Part – II)
Routine Tension Test of Steel
In this test the ultimate tensile strength, the yield point, the percent elongation, and the character of the fracture are determined. Sometimes the percent reduction of area is also determined. The Standard tensile-test spec...
|
sabita
|
0
|
345
|
|
|
|
|
|
Tensile Tests ( Part – I )
(Preview)
Tensile Tests ( Part – I )
Tensile-Strength Tests
Most commercial specifications for metals have requirements for physical properties as determined by the tensile-strength test. The properties determined include ultimate tensile strength, yield stre...
|
sabita
|
0
|
350
|
|
|
